Dandely

Restaurant location costs

How to find traffic counts for a possible restaurant location in Texas

This guide is for owners with one food concept and a few candidate spaces in Texas, before a lease is signed.

The short answer: use the Texas Department of Transportation's (TxDOT) public traffic count map and its STARS II database to find a dated average daily vehicle count on a named road near the address. Write down the station ID, the road and the count year. For direction or hourly detail, use STARS II. These figures count vehicles on a road. They do not count pedestrians, visits to a business or demand for a restaurant.

What a traffic count actually measures

Most public Texas counts are reported as AADT. TxDOT's STARS II User Guide puts it this way: "The annual traffic count represents the average number of vehicles per day at a traffic count location. This figure includes considerations for seasonal variation and the vehicle classifications at the count location."

So AADT is a typical day, worked out for a year. It is not what you would see if you stood on the corner on a Friday at noon.

Year

Every count has a year. The STARS II guide says that on its map, "The first number is the annual traffic count (AADT), and the second number in parenthesis indicates the count year."

Record both. A recent count is more useful than an old one. But an older official count is still a sourced fact. It is not a forecast of this year's traffic.

Direction

Some figures are two-way totals. STARS II can show more. TxDOT says "Detailed information such as daily, hourly, directional, vehicle classification, and historical statistics can be viewed in STARS II" (Traffic count maps).

Direction can matter for a restaurant. A space on one side of a divided road mostly gets drivers going one way. The statewide map's station pop-up has no direction field, so look in STARS II. If STARS II has no directional figure for the station, note that.

Road segment vs. intersection

A count belongs to a station on a road. It is not a turning-movement count at your driveway or signal. Do not read it as "cars that can turn into this parking lot." Turning, access and parking need their own checks.

Mainlanes vs. frontage roads

Many Texas strip centers sit on a frontage road beside a freeway. TxDOT is clear that these are counted apart: "Please note STARS II displays mainlane and frontage road counts separately" (STARS II page).

A big mainlane number is not the frontage-road number. If your space faces the frontage road, find the frontage-road count, or note that you could not.

What it is not

A traffic count is vehicles on a road. It is not people walking by. It is not visits to a business. It is not a sales forecast.

Dandely reports don't include traffic counts. The sample report says: "Traffic counts are not included." If you want a count for an address, the steps below show how to look it up yourself.

A high count does not mean the site will work. It is one dated fact to set beside your costs.

Start with TxDOT's Statewide Traffic Count Map (the quick look-up)

TxDOT says it "began publishing statewide traffic count maps in the 1930's and continues to publish a statewide traffic count map each year." Its traffic monitoring program "conducts over 75,000 short-term traffic counts each year on state and national highway system roads, local and county roads, as well as ancillary roads such as ramps and grade separated connectors," plus "over 350 continuous traffic count stations" that "collect data 24 hours a day, 365 days a year" (Traffic count maps).

Here is the quick look-up:

  1. Open the official pages. Go to TxDOT's Traffic count maps page. Choose "View the TxDOT Statewide Traffic Count Web Map." It opens the web map.
  2. Zoom to the address or the nearest named road. Do not grab the first big number on a nearby freeway if the space sits on a frontage road or a local street.
  3. Click a station. Stations only appear once you zoom in. On the "Annual AADTs" layer, the pop-up is titled "Annual Count for" the station ID. It lists:
    • DISTRICT
    • COUNTY
    • TRFC STATN ID (the traffic station ID)
    • ON ROAD
    • AADT for each year, from AADT 2025 back to AADT 2006
    • A "View in STARS II" link

    Stations on the "5 Year AADTs" layer have a shorter pop-up: DISTRICT, COUNTY, TRFC STATN ID, COUNT 2025 back to COUNT 2021, and the same STARS II link.

    Write down the station ID, the road, the year and the AADT for that year. Some years can be empty. A blank year means no figure for that year, not zero. The pop-up has no direction, time-of-day or hourly fields. For those, use the "View in STARS II" link or the STARS II steps below.

  4. Record every nearby count separately. If there are two or three, write down each one and the road it belongs to. Do not average them.

If you want the raw files, the same TxDOT page links GIS downloads for traffic counts and traffic stations.

One caution: TxDOT's Statewide planning map lists both "Traffic counts" and "Future traffic estimates." A future estimate is not a dated count. Keep them apart.

Use STARS II when you need more detail

TxDOT's manual says "STARS II is the official traffic data source for TxDOT and the State of Texas" (Traffic Monitoring System manual). Use it when you want the station record, not just a map label.

Steps, from TxDOT's STARS II User Guide:

  1. Enter from the official page. Open the STARS II landing page, read the disclaimer, then choose "STARS II (accept disclaimer and enter)." On 2026-11-16 that button led to https://txdot.public.ms2soft.com/tcds.
  2. Zoom in first. The guide's tip: "Zoom in to an area before turning the station layers on." You can type a city name in the address locator.
  3. Open the TCDS tools. Expand "Tools," then click "TCDS" (Traffic Count Database System). Check "TCDS Locations" to show stations. The first number is the AADT. The number in parentheses is the count year.
  4. Open a station record. Click a station, then "View Detail in a New Search." In the "Volume Count" table, the eye icon opens the count report, where the guide says "You can view 15-minute and hourly data."

By default, the guide says, "The most recent count for all stations is displayed when 'all' years are selected." You can pick a prior year from the drop-down.

Station types a founder may see

The guide lists several. Two matter most for a restaurant search:

  • Annual ACR: "Annual traffic counts taken on Texas state and national highway system roadways and a small set of additional roadways."
  • Urban ACR: "Urban ACR counts are conducted on a 5-year cycle, typically on local or county roads."

That means a local-street count can be a few years older than a nearby state-road count. Record each year. PERM stations are "Continuous count locations that collect daily traffic count data." For the rest, see the official guide.

Limits to know up front

TxDOT's disclaimer on the STARS II page says, in short:

  • STARS II shows "data and statistics which are not part of the annually validated data set."
  • "Data and statistics may vary according to collection type and intended use."
  • Figures reported for federal Highway Performance Monitoring System (HPMS) purposes "may be calculated differently from other figures."
  • "STARS II is a live production database. Historical data and statistics are considered final; however figures are subject to change."
  • "STARS II displays mainlane and frontage road counts separately."

Because figures can change, write down the date you looked.

Houston-area and other Texas sources

H-GAC (Houston–Galveston)

The Houston-Galveston Area Council collects its own counts. Its Traffic Data page says the data "is collected to improve estimates of the vehicle demand and vehicle miles traveled on non-TxDOT managed facilities" and that "H-GAC has created a Traffic Count Database System to facilitate distribution and viewing of the data collected." Start from that page. If your space is on a road TxDOT does not manage, this is where to look next.

H-GAC also has a Houston Regional Traffic Count Map, hosted at Texas A&M's TTI Houston site. Its About page says it shows "traffic counts provided to H-GAC by the Texas Department of Transportation (TXDOT) for our eight county planning area." On 2026-11-15, the map's pop-ups were labeled "2012 Volume" and "2006 Volume," and the About page describes counts "from the 2006 and 2012 saturation count program." Those are old counts. Treat this map as history, not a current figure, and not a substitute for STARS II.

City or county datasets

Some cities publish their own counts. If a local street has no TxDOT or H-GAC count, check the city or county. Record the agency, the year, and what kind of figure it is: AADT, a short-term count, or something else.

NCTCOG (North Central Texas, including Dallas–Fort Worth)

The North Central Texas Council of Governments covers a different region from Houston. Its Traffic Count Information Systems page says "NCTCOG provides associated current and historic data" on its Historical Traffic Counts map. Use it for North Central Texas sites, not Houston-area ones.

Which source first

Where the space isCheck firstThen
Anywhere in TexasTxDOT Statewide Traffic Count Web MapSTARS II for station detail
Houston–Galveston regionTxDOT map and STARS IIH-GAC for roads TxDOT does not manage
North Central Texas (incl. Dallas–Fort Worth)TxDOT map and STARS IINCTCOG historic counts
Local street with no count yetAll of the aboveCity or county source

How to record the number so you can use it

Write down the same fields for every address. Then anyone can check your figure later.

  • Address you were checking
  • Road name, and whether it is a mainlane, frontage road or local street
  • Station or segment ID
  • AADT or other labeled count, exactly as shown
  • Count year
  • Direction or hourly detail, from STARS II (the statewide map pop-up does not show it), or a note that STARS II has none for this station
  • Source URL and the date you looked it up
  • Any gap: no nearby station, only an old Urban ACR count, or only a freeway mainlane count when the space is on a frontage road

If two sources disagree, keep both, with their years and dates. Do not pick the higher number.

These fields belong next to your rent and other inputs. Our free location comparison checklist and cost template gives you a printable PDF and a blank CSV, with no signup.

How Dandely fits

Dandely compares candidate restaurant locations using the costs you enter. Dandely reports do not include traffic counts. The sample report and terms say: "Traffic counts are not included." The sample report and coverage page also say: "Traffic counts remain excluded." The homepage says: "No rankings, property recommendations, sales or demand forecasts or traffic counts." If a count matters to your decision, look it up with the steps in this guide and set it beside your costs yourself.

The report "does not rank locations, predict demand, or choose a property." It covers the official city limits of Houston, Sugar Land, Katy, Pearland and Pasadena, plus The Woodlands Township, as described on the six markets Dandely covers. The lookup steps in this guide work statewide. The report does not.

To see what a comparison looks like, read the fictional sample report.

FAQ

How do I find traffic counts for a possible restaurant location in Texas?

Open TxDOT's Traffic count maps page and its Statewide Traffic Count Web Map. Zoom in until stations appear on the road beside the address. Click a station and record the station ID, the road, the year and the AADT for that year. Use STARS II for direction and hourly detail. In the Houston–Galveston region, also check H-GAC.

What does AADT mean, and what year should I record?

Annual average daily traffic: a year's vehicle traffic divided by 365 days, meant to represent a typical day. Record the count year shown with it. In STARS II, that is the number in parentheses. A number without a year cannot be checked.

Is a traffic count for a road segment the same as a count at an intersection?

No. It is a count at a station on a road, not a turning count at a signal or driveway. Mainlane and frontage road counts are shown separately, so a freeway count is not the count for the frontage road beside a strip center.

Does a high traffic count mean more restaurant customers?

No. It counts vehicles on a road. It does not measure pedestrians, visits or demand.

Which source should I use in Houston vs. elsewhere in Texas?

TxDOT's map and STARS II anywhere in Texas. Add H-GAC in the Houston–Galveston region and NCTCOG in North Central Texas. Then try the city or county for a local street.

Next steps (free)

General education, not property, lease, tax, insurance, engineering or legal advice. Official sources quoted were checked on November 15, 2026. Pages and figures can change. Dandely is operated by Kagi LLC.